SN Series bearing housing is light weight and an economical choice for moderate load and speed requirement applications. This series is considered as basic design in service since many decades.
MASTA SN Series Horizontally Split Plummer Blocks are designed for moderate loads and speeds, making them ideal for clean and temperate operating environments. The bearing seat in the SN Series Plummer Blocks is designed to provide adequate axial freedom for the bearing. A locating bearing can be achieved by fitting one or two locating rings, depending on the required axial positioning.
| PARAMETER | VALUE |
|---|---|
| Shaft Diameter (d) | - |
| Center Height (H) | - |
| Base length (A) | - |
| Base Width (B) | - |
| Center distance between Foundation bolt holes (E) | - |
| Center distance between Foundation bolt holes (Axial direction) (E1) | - |
| Bore Diameter (D) | - |
| Bearing seat Width (Ca) | - |
| Foundation bolt (S) | - |
| Foundation Hole (N) | - |
| Foundation Hole (N1) | - |
| Base Height (V) | - |
| Housing Width (L) | - |
| Housing Height (h1) | - |
| PARAMETER | VALUE |
|---|---|
| Housing Type | Plummer Block |
| Type of Shaft | Through shaft / End shaft |
| Number of Foundation bolt | 2 |
| Bearing housing seal type | Felt Seal / V-Ring |
| Housing Material | Grey Cast Iron / Ductile Iron |
| Bearing type | Self-aligning ball / Spherical roller bearing |
| Bearing Designation | - |
| Sleeve type | Adapter sleeve |
| Model | Shaft Dia (d) | Center Height | Base Length | Bore Dia (D) | Foundation Bolt | Appropriate Bearing | Action |
|---|---|---|---|---|---|---|---|
| Loading variants... | |||||||
Interested in SN 511? Fill in your details and our team will get back to you within 1 business day.
